ULTRA LINE TOP KOTE T1 ULTRA HYDROPHOBIC CERAMIC SERUM
-
A diy ceramic serum
-
Box contains:
1 x 50ml TOP KOTE T1
1 x pair of nitrile gloves
1 x Ultra Soft Foam Filled Appicator
1 x Instruction Sheet
1 x Microfiber Towel
Nanoskin T1 Ultra Hydrophobic Ceramic Serum
Directions For Use:
* To apply ULTRA LINE T1, your vehicle must be indoors and remain indoors for at least 12 hours after T1 application.
1. WASH
Thoroughly wash vehicle free of dust, sand, and dirt.
2. DE-CONTAMINATE
Clay / AUTOSRUB paint surface with NANOSKIN GLIDE to remove bonded contaminants.
3. OPTIONAL PAINT CORRECTION
If necessary polish your paintwork to remove any imperfections (swirls, scratches, imperfections)
4. DE-GREASE
If you don’t have NANOSKIN OPTIMUM LAYOUT Panel Wipe with Adhesion Promoter, simply spray IPA 70% onto a microfiber cloth and then carefully wipe down your paint work to remove oil polish residues.
5. APPLY
Soak the Ultra Soft Foam Filled Applicator with proper amount of T1 from the bottle (8-10 drops on pad per 2 sq ft). Spread onto the surface evenly. Allow to haze for 30 ~ 45 minutes and remove residue with a microfiber cloth. *haze time may vary due to temperature and humidity